GEP-F722-35A AIO (F722 FC 35A 2-6S 8bits BLS ESC 25.5mm)

Introduction:

It is my pleasure to introduce the new member of GEP AIO flight controller, GEP-F7-45A V2 AIO, which is now on the shelves.

GEP-F7-45A AIO is carefully designed by the GEP team, using the high-performance F722 master control, which has powerful performance and higher computing speed.

With 5 sets of complete UART ports, more external devices can be used. Independently designed a 6P interface, using a cable to plug directly into the DJI air terminal, reducing welding steps.

BLheili_S 45A ESC can achieve a continuous current of 45A, an instantaneous current of 55A (10 seconds), and supports 2-6S battery input. 18-20-22-23 series motors can be used with 3-5 inch propellers.

Support OSD parameter adjustment, buzzer, LED and other functions. The ultra-light weight of 8.8g, and the mounting holes of 25.5mm*25.5mm, fit most of the racks on the market.

We pursue flight controllers with lighter weight, smaller size, more functions and better performance.

The main parameters:

Product name: GEP-F7-45A AIO V2

MCU: STM32F722

IMU: accelerometer (SPI)

Flight control firmware: GEPRC_F722_AIO

OSD: Betaflight OSD w/ AT7456Ev

Ports: R1 T1 / R2 T2 / R3 T3 / R4 T4 / R5 T5

Buzzer: YES

LED: YES

USB interface: micro USB

BEC output: 5V@1A

ESC MCU: BB21F16G

Continuous current: 45A

Peak current: 55A (10s)

Input: 2~6S (LIPO Battery)

ESC protocol: Dshot600, Oneshot, Multishot

Ammeter: 210

ESC firmware: G_H_30

Size: 32x32mm Board

Mounting hole: 25.5mm*25.5mm

Features:

1. The high-performance F722 master control has strong performance and higher computing speed

2. It has a complete set of 5 UART ports, which can be connected to more external devices

3. Independently designed 6P interface, use a flat cable to directly plug into the DJI air terminal

4. Use BLHEILI_S 45A ESC, support 2-6S LIPO battery input, continuous current 45A, instantaneous current 55A (10 seconds)

5. Support OSD parameter adjustment, buzzer, LED and other functions

6. 8.8g weight

7. 25.5mm*25.5mm mounting holes, suitable for most racks

Product List:

1 x GEP-F7-45A AIO

1 x XT30-7CM-18AWG power cord

1 x 35V220UF capacitor

1 x SH1.0-6P flex cable

1 x matching screw pack